The following article is intended as a brief discussion about the uses of the Tetra Cap in an auto body repair shop. This article does not include information on how to fit the cap to your tires, how to remove it once it has been fitted, or any other relevant matters regarding the product. Rather, this is a general introduction to the product and some of its uses. It also attempts to cover the reasons why it is an excellent choice of tire inflation device. After reading this article, you should be familiar with the uses of the Tetra Cap, how to correctly use it, and why it may be a good choice of tire inflation device for your business or vehicle maintenance department.
The primary use of the tetra cap applicator cap (and the a3 flex that goes with it) is for placing the tire onto the tire bed in order to fill tires with Slim Cap or other air-filled tire products. Typically, the cap is used for up to four hours per tire without having to worry about changing the air at your auto body repair shop because the tetra and the a3 flex will keep the air in the tire bed for the entire duration of working hours. In addition to filling tires, the Tetra cap can be used to secure a tire that has been lifted from the vehicle during transport.
The second use of the tire and a tire applicator cap is when a tire that needs to be returned to the shop is being replaced. One of the reasons that a person may choose to remove their own tire is that it is a very tough and durable item to begin with, and if left on the vehicle for working hours, it could be damaged by road debris or blow-outs. Furthermore, the weight of one's vehicle can cause damage to a flat tire. For these reasons, it makes sense to replace the flat tire rather than leaving it on the vehicle for longer than necessary. However, the use of the tetra in this situation could cause damage to the tetra line because of the way the rubber is trimmed by the manufacturer.
tetra Industries has provided consumers with many options for filling their tires with their product. tetra Taba 19 125 ML slim line tetra beverage carts, are a popular option because of the product's ability to fill a wide variety of automotive rubber items that might need to remain on a flat tire during a transport situation. tetra beverage cartons are made from an advanced rubber compound that has excellent load bearing properties. The high strength of the rubber provides the carton with a solid and dependable foundation upon which to rest its contents. tetra is committed to meeting all of the requirements of consumers while providing a superior product that remains cost-effective throughout its life cycle.
tetra Industries offers a full range of tetra tcap products including accessories. A good used working condition example of this accessory would be the tetra cap applicator. The applicator is a simple yet effective device that helps fill automotive parts, particularly those that are not easily accessible or have limited access to a pump or other means of filling from the rear of the automobile. This application device can be used on any car model manufactured after 1996, and can be obtained through a distributor in most cases. A good used working condition example of the applicator would include the following:
Additional accessories offered by tetra Industries include a fastening strap for attaching a can or bottle to the can holder and a rubber ring. An interesting example of this accessory is the tetra cap applicator wrench, which serves to increase the usability of this essential item. In addition to serving to increase the usability of this item, the wrench can also aid in decreasing the overall size of the can or bottle and prevent it from resting against a sharp edge. A good example of a filling machine accessory would be the tetra cap bottle brush.
0 comentários:
Post a Comment